Boots Multi-Use Descaler - 3x25ml sachets
In order to buy non-prescription medicines you must be a registered user of our site as we are obliged to record your transaction history. We also ask that you complete our questionnaire so our pharmacy team can check that this product is suitable for you to buy.
Disabled or chronically sick people can claim VAT relief on purchases for personal or domestic use that are applicable to their disability or sickness.
Collect 4 Boots Advantage Card points with this purchase
Boots Multi-Use Descaler contains a concentrated formula which removes limescale from metal kettles, plastic kettles, coffee makers, steam irons and shower heads.
How to use
Half fill the kettle with water and boil.
Unplug kettle and place in an empty plastic bowl. Slowly add the contents of one sachet to the boiled water and leave for 10minutes.
Should any limescale remain, re-heat solution until it starts to bubble. DO NOT BOIL.
Pour the solution away and rinse thoroughly with cold water. Fill and boil, then empty and rinse again. Use regularly to prevent build-up of severe limescale which can cause damage to the lining of your kettle.
Half fill the water reservoir with water and add the entire contents of one sachet.
Switch the coffee maker on and let about half of the solution filter through. Switch off and leave for 10 minutes.
Boil through the remainder of the liquid and then empty down the sink.
Before use, the coffee maker should be operated twice, filled to the maximum mark with cold water.
Best results are obtained when iron is hand warm but ENSURE IRON IS UNPLUGGED BEFORE DESCALING.
Empty the contents of one sachet into a small jug and pour into the water chamber of the iron. Top up with tap water, and set to steam.
Place the hand warm iron into an empty plastic bowl with the hot plate facing downwards. Then shake gentle until the solution starts to drain through the steam holes. Leave for about 10 minutes or until empty. If iron has a spray button briefly pump it through.
Rinse out thoroughly twice, with cold water. Drain and dry the iron. Make sure that no liquid remains in the water chamber or around the steam holes by briefly ironing a spare piece of fabric before using normally.
Detach shower head from its fitting and place it sprinkler holes down, in a measuring jug.
Empty the sachet contents into the jug and add only enough hot water to cover the sprinkler holes. If shower head is fixed, remove the sprinkler nozzle and place in the jug. Leave to stand for 10 minutes
Pour away the liquid, rinse well with cold water and re-assemble the shower head.
- Use regularly to prevent the build up of severe limescale
- In some cases, the build up of limescale can cause damage to the lining of your appliances. The removal of limescale may reveal this damage. It will not have been caused by the action of the Boots Multi-Use Descaler.
- Avoid spilling or splashing on enamelled, coated or decorated surfaces. Wash away any spillages with hot water, and wipe splashes with a clean damp cloth.
- Severely scaled appliances may need a second application.
Hazards and Cautions
Keep out of reach of children.
Always read the product information before use.